Click on above logo for web site

High-Volume/ Low-Speed Fans

High-Volume/Low-Speed (HVLS) fans meet the
tough challenges of large building environments.
Revolution HVLS fans circulate huge quantities
of air at just the right speed to produce uniform,
non-disruptive airflow.

  Unique Propell-Aire™ blade design
  Upward blade tilt
  Robust mounting system
  Simple, easy-to-use controls
  Works in hot & cold environments
  Creates a consistent floor to ceiling temperature
  Backed by Rite-Hite's 1-year Customer Satisfaction Guarantee

HVLS industrial fans slowly circulate a large amount of air in a very large space. The Revolution fan can circulate air across an area up to 25 metres from the fan's centre in all directions (over 2,000 square metres for a 600mm fan). Fan diameters range from 2.4 to 7.2 metres. Air is pulled from above the fan and pushed down in a conical shape to the floor below. Air travels in this cone shape until it hits the floor and then moves in a horizontal stream away from the diameter of the fan.

The Revolution® Fan’s airflow is different than other HVLS fans. With extruded blade designs, there is an area directly underneath fans where you feel little if any air movement. These “holes” exist because an extruded blade does not move air uniformly across the full diameter of the fan. These “holes” do not exist with the Revolution® Fan, which is an important benefit for many applications.

Full Line Brochure	4-Blade Spec Sheet	Fan Planner